Operation Manual

SilverCrest SGKT 50 A2
English - 27
REGISTER
You can register up to 5 handsets with one base. By default, the handset supplied has already
been registered with the base. To register a de-registered or a new handset with the base, proceed
as follows:
 Press and hold the Locator button [25] on the base for about 10 seconds. “REGISTER”
will appear on the display [17].
Notice for using handsets from different manufacturers
If you want to register third-party DECT handsets that support the GAP standard with
your SilverCrest base, please read the documentation of their manufacturers. However,
it cannot be guaranteed that third-party handsets will be fully compatible even when
using the GAP standard.
 Press the  or  multifunction control buttons [4] on the handset to select the base from
the list to which you want to register the handset. Then press the Menu/OK button [12].
 Enter your four-digits PIN code (default 0000) and press the Menu/OK button [12] to
confirm.
 As soon as the handset has established a connection to the base, a beep can be heard
and the name and number of the handset are shown on the display [2].
Notice for using bases from different manufacturers
If you want to register the SilverCrest handset with the base of a different manufacturer
that supports the GAP standard, please read the documentation of the third-party
manufacturer. However, it cannot be guaranteed that the SilverCrest handset will be
fully compatible even when using the GAP standard.
DE-REGISTER
This menu item allows you to de-register a handset that is currently registered with the base.
Proceed as follows:
 Enter your four-digits PIN code (default 0000) and press the Menu/OK button [12] to
confirm.
 Enter the number of the handset that you want to de-register (1 to 5).
 Press the Menu/OK button [15] to confirm your entry.
 After the handset has been de-registered, a confirmation beep will sound.
 Instead of the name of the handset, the de-registered handset display [2] will show
“NOT REGISTER”.