Operation Manual

SilverCrest SGKT 50 A2
32 - English
PBX, you can use this function for switching to an internal conversation or to forward the call. The
Recall/Flash function of the handset or base will cause a short, temporary line interruption.
The following options are available:
SHORT
100 ms interruption.
LONG
300 ms interruption.
Press the  or  multifunction control buttons [16] to select the desired option. To save the
selected setting, press the Menu/OK button [15]. A confirmation beep will sound and the “SAVED”
message will appear for a few seconds on the display [17].
The Recall/Flash function on your handset or base allows you to use specific services
for external phone calls, e.g. “Call Waiting”. The requirement for this is that your
network provider supports this feature.
SYSTEM PIN
To change the PIN code, proceed as follows:
 After confirming by pressing the Menu/OK button [15] the message “OLD PIN-”
appears on the display [17].
 Enter the old PIN code (default 0000) and press the Menu/OK button [15] to confirm.
 “NEW PIN-” will appear on the display [17]. Enter a new 4-digits PIN code and press
the Menu/OK button [15] to confirm.
 “AGAIN-” will appear on the display [17]. Enter the new PIN code again and press the
Menu/OK button [15] to confirm.
 A confirmation beep will sound and the “SAVED” message will appear for a few
seconds on the display [17].
 Please make sure you remember the PIN code or keep it in a safe place.
When resetting, the PIN will not be reset. In case that you have lost your PIN, please contact our
Service Hotline (see page 49).