Operation Manual

SilverCrest SGKT 50 A2

English - 37

Saving a phone number from the calls list to the phonebook

To save a phone number from the calls list to the phonebook, proceed as follows:

 Press the  or  multifunction control buttons [4] to select the phone number from the

calls list that you want to save to the phonebook and then press the Menu/OK button

[12].

 Press  or  on the multifunction control [4] to select the “SAVE TO PB” menu item and

then press the Menu/OK button [12] to confirm

 “NAME?” will appear on the display [2]. Next enter the name you want via the numeric

buttons [6]. Press the

button on the multifunction control [4] to erase any mistyped

character. Keep the

button on the multifunction control [4] pressed to clear the entire

entry. Press the Menu/OK button [12] to save the name.

 The phone number will appear on the display [2]. Now you can edit the phone number

via the numeric buttons [6]. Press the

button on the multifunction control [4] to erase a

digit. Keep the

button on the multifunction control [4] pressed to clear the entire entry.

Press the Menu/OK button [12] to save the phone number.

 A confirmation beep will sound and the “ENTRY SAVED” message will appear for a few

seconds on the display [2].

Hands-free function

To enable the hands-free function, press the Dial button [11] twice while in standby mode or press it

once during a phone call. When the hands-free function is enabled, the

icon will show on the

display [2].

Press the Dial button [11] again to switch the hands-free function back off.

You can press the

button on the multifunction control [4] to adjust the volume of

the speaker for the hands-free function. The current volume level is shown on the

display [2]. Only while the current volume level is shown on the display [2] you can

press the

button on the multifunction control [4] to increase the volume.