Operation Manual

SilverCrest SGKT 50 A2
English - 39
Locking the keypad
Press and hold the Hash button [7] for approx. 2 seconds to lock the keypad against accidental
input. However, you will still be able to answer any incoming calls by pressing the Dial button [11].
To unlock the keypad, press and hold the Hash button [7] again for approx. 2 seconds.
When the keypad is locked, the
icon will show on the display [2].
It is still possible to dial the pan-European emergency number 112 while the keypad
is locked.
Switching the ringtone off
Press and hold the Asterisk button [10] for approx. 2 seconds to switch the ringtone off. To switch
the ringtone back on, press and hold the Asterisk button [10] again for approx. 2 seconds.
When the ringtone is off, the
icon will show on the display [2].
Base - Everyday use
Making calls
External calls
Use the numeric buttons [24] to enter a telephone number. After you have entered the phone
number, pick up the receiver to call the entered number.
Press the
button [26] to clear the entered digit.
You can adjust the receiver volume during a call by pressing the button [27] to
reduce the volume or the
button [28] to increase it. The current volume level is
shown on the display [17].
You can also pick up the receiver first and dial the number afterwards using the numeric buttons
[24]. Please note that in this case the entered phone number is dialled immediately.