Operation Manual

SHSS 16 A1
■ 6
│
GB
│
IE
│
NI
│
CY
Before first use
■ Remove all packaging materials and protec-
tive stickers from the appliance, especially the
protective sticker on the contacts on the back of
the hand element .
■ Place the cradle # onto the stand so that the
cradle # clicks into place.
NOTE
► This appliance is supplied with non-charged
batteries. The batteries must be charged for
5–6 hours before using the appliance for
the first time.
Charging the appliance
NOTE
► Ensure that the appliance is switched off
before starting to charge the batteries.
■ To charge the appliance, connect the charger ,
to a mains socket. Plug the barrel plug  into
the charging socket " on the underside of the
cradle #. Feed the cable through the recess on
the rear of the cradle # so that the cradle # is
not resting on the cable.
■ Place the handle with the attached hand ele-
ment  onto the cradle #.The charge indicator
lamp  lights up red. When the appliance is
fully charged, the indicator light  lights up
green.
■ Do not recharge the batteries until the suction
power of the appliance has become noticeably
weaker.
NOTE
► When the batteries are weak, the charge
indicator lamp  starts flashing green.
When this happens, the appliance can be
operated for another 3 to 5 minutes.
► Once the batteries are completely dis-
charged, the charge indicator lamp 
flashes red five times and the appliance
switches off.
Assembly/disassembly
Connecting the hand element to the
handle/removal from handle
Fig. 1 Fig. 2
■ To connect the hand element  to the handle,
push the tip of the hand element  into the
opening in the hand element recess ..
■ Then press the grip  of the hand element 
into the handle so that the hand element 
clicks firmly into position (Fig.1).
■ To remove the hand element  from the handle,
press the release buttons
!.
■ Then pull the hand element  upwards and
forwards out of the hand element recess .
(Fig. 2).