Specifications

Section 5
Removal and Installation
130
Step 1
Air Filter Regulator
NOTE: The repair kit contains four nuts, one
O-ring and the air filter regulator. Before
removing, mark the installation position of the
air filter regulator for fitting later on.
Removal
Remove the four nuts and take off the air filter
regulator. Remove the O-ring.
Step 2
Installation
CAUTION
Do not use grease to fit the O-ring.
Step 1
Insert the new O-ring.
앫
GO TO THE NEXT STEP.
Step 2
Install the air filter regulator as marked during
removal.
앫
GO TO THE NEXT STEP.
Step 3
Install and tighten the four nuts to to 5 lb-ft
(7 N폷m).
4007232a
NUTS
4007233a
TRANSMISSION
ACTUATOR
PRESSURE
RELIEF VALVE
O-RING
T