Operation Manual

■ 12

│

SKD 2300 D4

Switching on the fan

The appliance has a fan which can be used to distribute heated air throughout the

room more quickly.

♦ Press the fan button

to switch the fan on or oﬀ.

If the fan is running, the „Fan“ symbol

appears on the display

NOTE

► If the fan is switched oﬀ, the heat is concentrated more around the appliance

and is not distributed so quickly around the room.

Set heating time

The appliance has a timer that you can use to set the desired heating time between 1 to

24 hours. Once this period is over, the appliance switches oﬀ automatically.

♦ Press the timer button

or until the desired runtime

is shown on the

display

♦ To switch the timer oﬀ, press the timer button

or repeatedly until no runt-

ime

appears on the display

Overheating protection

The appliance is ﬁtted with a thermostat-controlled overheating protector. If the appli-

ance becomes too hot internally, the heating element switches oﬀ automatically. As

soon as the appliance has cooled down, the heating element switches back on.

WARNING

As a general rule, there is a reason for overheating! It can mean a

risk of ﬁre!

► Check that the appliance can suﬃciently dissipate the heat generated: Is the

appliance covered or is it too close to a wall or other obstacle? Is the fan

blocked?

► Check that neither the air inlet

nor the air outlet

is blocked and remove

the cause.

► If possible, eliminate the problem or contact the Service Hotline (see the chap-

ter Service).

► Even if you cannot ﬁnd a cause, but the overheating protection triggers a

second time, you must return the appliance to Customer Services for inspection

or repair.