Operation Manual

■ 6

│

SKD 2300 D4

■ The metal surfaces of the appliance can become hot.

Therefore, only hold the appliance by the handles

■ All repairs must be carried out by authorised specialist com-

panies or by the Customer Service department. Improper re-

pairs can pose signiﬁcant risks to the user. It will also invali-

date any warranty claims.

■ Defective components must always be replaced with original

replacement parts. Only by using original replacement parts

can it be assured that the safety requirements are being com-

plied with.

■ Protect the appliance from penetration by moisture and liquids.

■ Always unplug the appliance from the mains power socket

before cleaning.

■ Always disconnect the power cable from the mains power

socket by pulling on the plug; never pull on the cable.

■ Avoid using extension cables.

■ Do not use the appliance in the vicinity of naked ﬂames.

■ The appliance must not be placed immediately under or over

a mains power socket.

■ Do not use this heater together with a programmable switch,

a timer, a separate remote control system or any other system

which switches on the heater automatically, as this could lead

to a ﬁre risk if the heater is covered or set up incorrectly.

■ Disconnect the plug from the mains power socket if the appli-

ance malfunctions and also during thunderstorms.

■ The appliance must not be used in the immediate vicinity of

a bath, a shower or a swimming pool.

■ The appliance is to be installed so that a person in the bath

or shower is unable to touch the switch and other controls.

■ Do not expose the appliance to spray and/or dripping water

and do not place any objects ﬁlled with liquid, such as vases

or open drink containers, on or near the appliance.