Quick Start Guide

Working with the blender
1) Push the release lever  upwards and push the swivelling arm  down into its working position.
2) Pull off the drive unit lid 1.
3) Place the blender 0 onto the blender drive unit + so that the locking mechanisms on the bottom of
the blender 0 fit into the recesses in the blender drive unit +. The arrow on the blender 0 must point
to the
symbol on the appliance. Rotate the blender 0 clockwise as far as it will go.
The arrow on the blender 0 must point to the symbol on the appliance.
4) Add the ingredients.
5) Place the blender lid . with measuring cup ! onto the unit, making sure that the lip on the lid .
seals the spout.
6) Turn the rotary switch  to the required setting.
Ident. no.: SKMP1300B3-042015-3
short_IB_113373_74_GB.indd 2 29.06.15 16:32
DIN A5 148 mm x 210 mm