Operation Manual

GB
│
99 ■
SMUD 860 A1
– Clean the silver panel with the sealing ring in warm water with a little
detergent, then rinse it with clear water.
– Wipe the inside of the appliance lid  with a damp cloth. If neces-
sary, use a little detergent on the cloth. Afterwards, wipe with a cloth
moistened only with clear water to ensure that no detergent remains on
the appliance.
– Dry everything properly.
– In order to insert the silver panel with the sealing ring, first insert the up-
per brackets (2) into the indentations in the appliance lid .
– Then push both locking mechanisms (1) into the appliance lid  until
they click into place.
■ To clean the steam vent , you can disassemble it:
– Pull the steam vent  out of the appliance lid  and turn it upside
down:
– Turn the flat lid of the steam vent  anticlockwise so that the arrow on
the flat lid is pointing at the opened lock: