Operation Manual

SilverCrest SMW 800 D3
60 - English
10. Cleaning / Maintenance
10.1. Maintenance
WARNING! Servicing is required if the microwave is damaged in any way, for example, if liquid
or objects have entered the casing, if the microwave is exposed to rain or moisture, if it is not
working properly or if it has been dropped. If you notice any smoke, unusual noises or strange
smells, switch the microwave off immediately and disconnect the mains plug from the mains socket.
Keep the door closed to stifle any flames. If this occurs, the microwave should no longer be used
until it has been inspected by authorised service personnel. All servicing work must be carried out
by qualified specialist personnel. Never open the casing of the microwave.
10.2. Cleaning
DANGER! Unplug the mains plug from the mains socket before you start to clean, there is the risk
of electric shock!
DANGER! Wait until the microwave has cooled down. Risk of getting burnt!
DANGER! Never immerse the microwave itself in water, there is a risk of electric shock!
WARNING! Do not use oven cleaner spray to clean the cooking space, as this can produce
residues on the heating rods which cannot be removed.
To clean, remove the glass plate (2) and the roller ring (4). These parts can then be cleaned in hot water
with washing-up liquid. Rinse all parts with clean water and dry them thoroughly. Never use abrasive
materials for cleaning.
The glass plate (2) can also be cleaned in the dishwasher.
To clean the inside and outside surfaces of the microwave, use a slightly dampened cloth and a little
washing-up liquid. Never use any solvents or cleaners that may damage the plastic. Then dry all parts
thoroughly.
Regularly clean the door, the window, the door seals and adjacent parts with a damp cloth. Do not use
abrasives.