Operation Manual

SPBD 5000 A1

GB│IE│NI │ 11 ■

Returning the packaging to the material cycle conserves raw

materials and reduces the amount of waste which is gener-

ated. Dispose of packaging materials which are no longer

needed in accordance with applicable local regulations.

Charging the power bank

Before using the power bank, the integrated battery must be

fully charged.

CAUTION

►

Due to the high battery capacity and bearing in mind

the charging time, the power bank must be charged

using a USB mains adapter.

► Use only a USB mains adapter with an output voltage

of 5V and an output current of at least 2.1A to charge

the power bank.

► Charging takes about 3 hours.

♦ Connect the USB plug of the charger cable to a

suitable a USB power supply (not supplied).

♦ Connect the micro-USB plug on the charging cable to

the micro-USB charging port (IN) on the power bank.

The current charge level is shown during charging by

means of the charge level LEDs :

LED display Charge level

One LED is ﬂ ashing < 20%