Operation Manual

SFPW 360 A1
GB
│
IE
│
35 ■
Use
Requirements for the set-up location
NOTE!
► When choosing a location for the appliance, en-
sure that the appliance is not subjected to direct
sunlight, vibration, dust, heat, cold and moisture.
► Do not set up the appliance in the vicinity of
heat sources, such as radiators.
► Protect sensitive surfaces before setting up the
product.
♦ Place the appliance on a flat and level surface.
Connecting to a power supply
The appliance can be operated on the mains or with
batteries.
For permanent projection of the time, the appliance
must be operated on the mains.
Mains power operation:
♦ Ensure that the On/Off switch for permanent projec-
tion is in the "OFF" position.
♦ Plug the low voltage plug on the mains adapter 0
into the connector socket 3 on the appliance and
connect the mains adapter 0 to an easily accessi-
ble mains plug.
Battery operation:
♦ Open the battery compartment- on the rear of
the appliance by removing the battery compart-
ment cover!.
♦ Insert two type AAA batteries into the battery com-
partment - as shown.
♦ Close the battery compartment- again.