Operation Manual

SFPW 360 A1

■ 38

│

The time is shown in 24-hour format by default. If

you select the 12-hour format, the abbreviation PM

(Latin: "post meridiem" = afternoon) is shown in front

of the time between 12 noon and 11.59 at night. The

abbreviation AM (Latin: "ante meridiem" = morning)

is shown in front of the time between 12 midnight and

11.59 in the morning. During the summer period, DST

(daylight saving time) is displayed. This display is only

shown if the DCF signal is being received.

The room temperature is displayed to one decimal

place under the time. The preset temperature unit is

degrees Celsius ( ) and can be changed to degrees

Fahrenheit (

Handling and operation

Setting the date and time manually

NOTICE

If no button is pressed for around 30 seconds

during manual setting of the time, the appliance

exits setting mode.

Any settings already made will be saved.

♦ In basic mode, press the SET button  for about 3

seconds. The year ﬂashes on the display.

♦ Press the – /WEEK LANG button or the

+/ZONE 12/24 button to set the desired value.

♦ Press the SET button to conﬁrm your entry.

The month display ﬂashes on the display.

♦ Press the – /WEEK LANG button or the

+/ZONE 12/24 button

to set the desired

value.