Operation Manual

SFPW 360 A1
■ 42
│
GB
│
IE
Setting the alarm time
The appliance allows you to set two different alarms.
The set alarm times always relate to the time shown
on the display (local time or time zone).
♦ In basic mode, press the SET button once to
access alarm mode. The current alarm time is
shown on the display and the symbol for the first
alarm (AL1).
♦ Press the SET button for about 3 seconds. The
hours flash on the alarm time display.
♦ Press the – /WEEK LANG button or the
+/ZONE 12/24 button to set the desired value.
♦ Press the SET button to confirm your entry.
The minutes flash on the alarm time display.
♦ Press the – /WEEK LANG button or the
+/ZONE 12/24 button to set the desired value.
♦ Press the SET button to confirm your entry. The
alarm symbol appears on the display to
indicate that Alarm 1 is active.
NOTICE
► The process for setting the second alarm time is
similar to that of setting the first.
♦ In basic mode, press the SET button twice
to access alarm mode. The current alarm time
is shown on the display and the symbol for the
second alarm (AL2).
♦ Now, follow the steps described above to set the
second alarm time.