Operation Manual
SFPW 360 A1
■ 44
│
GB
│
IE
Battery change display
If the battery symbol (battery change display + )
appears on the display, the batteries should be
changed as soon as possible (see section Connecting
to a power supply).
Switching on the backlight/display
illumination
Press the
SNOOZE/LIGHT button
to switch on
the display illumination and the projection for about
5 seconds.
Projection function
This appliance offers you the option to project the
time or the temperature onto a level surface, such as
a wall in a (preferably dark) room. The projection
area can be swivelled 180° from the front to the
back. The maximum projection distance is 4m.
Single projection
♦ Press the SNOOZE/LIGHT button to switch on
the projection
and the display illumination for about
5seconds.
Permanent projection
For permanent projection, the mains adapter must be
connected to a power supply (see section Connect-
ing to a power supply).
♦ Set the On/Off switch for permanent projection
on the rear of the appliance to the position ON to
switch on the projection.
♦ Set the On/Off switch for permanent projection
on the rear of the appliance to the position OFF to
switch off the projection.