Operation Manual

SRR 3.7 C3
GB
│
IE
│
NI
│
9 ■
Charging the battery
The battery should be charged for at least 60 minutes before first use.
NOTE
► Ensure that the appliance is switched off before charging the
battery.
1) Plug the connector w into the mains connection 0 on the shaver.
2) Plug the mains adapter q into a mains socket that complies with
the appliance specifications. While the battery is charging, the red
charge indicator light
8 flashes.
♦ When the battery is fully charged, the blue control lamp
7
lights up. Disconnect the product from the mains supply.
♦ Once the battery is fully charged, you can use the appliance for
around 60 minutes without connecting it to the power supply.
♦ If the red indicator light
8 flashes, the battery charge level is
too low. Recharge the battery in that case.