Operation Manual

SRR 3.7 C3
■ 12
│
GB
│
IE
│
NI
Trimmer/long hair trimmer
To shape your beard, form sideburns or shave eyebrows, use the
long hair trimmer 4.
1) To do this, push the catch 5 towards the long hair trimmer 4.
The long hair trimmer 4 flips out.
2) Press the On/Off switch
6. The shaver starts the cutting unit 2
and the long hair trimmer 4, the blue control lamp 7 lights up.
3) Once you have finished trimming, press the On/Off switch
6
again to turn off the appliance. The blue control lamp
7
goes out.
4) Clean the long hair trimmer 4 with the supplied brush e. For a
more thorough cleaning, read the section “Cleaning and care”.
Cleaning and care
DANGER – ELECTRIC SHOCK!
► Before cleaning the device, disconnect the mains adapter q
from the mains power socket! There is a risk of electric shock!
CAUTION! MATERIAL DAMAGE!
► Do not use abrasive, chemical or caustic cleaning agents
to clean this appliance. This will irreparably damage the
appliance.
Cleaning with the brush
Cutting unit
Clean the 3 shaving heads of the cutting unit 2 after every shave
using the brush e.
1) Take hold of the cutting unit 2 with three fingers in the grip
recesses 3 and pull it off.