Operation Manual

│

3 ■

SSMS 600 D3

Items supplied

The appliance is delivered with the following components as standard:

▯ Hand Blender Set

▯ Measuring beaker with combined lid/base

▯ Whisk

▯ Liquidiser (Blade and bowl with combined lid/base)

▯ Operating instructions

1) Remove all parts of the appliance and these operating instructions from the box.

2) Remove all packing material.

3) Clean all parts of the appliance as described in the chapter “Cleaning”.

NOTICE

► Check the contents to make sure everything is there and for visible damage.

► If the contents are incomplete, or have been damaged due to defective

packaging or transportation, contact the Service Hotline (see chapter

Service).

Disposal of the packaging

The packaging protects the appliance from transport damage. The packaging

materials are selected from the point of view of their environmental friendliness

and disposal technology and are therefore recyclable.

The recirculation of packaging into the material circuit saves on raw material

and reduces generated waste. Dispose of packaging material that is no longer

needed according to the regionally established regulations.

Dispose of the packaging in an environmentally friendly manner.

Note the labelling on the packaging and separate the packaging material

components for disposal if necessary. The packaging material is labelled with

abbreviations (a) and numbers (b) with the following meanings:

1–7: Plastics,

20–22: Paper and cardboard,

80–98: Composites.

NOTICE

► If possible preserve the appliance's original packaging during the war-

ranty period so that in the case of a warranty claim you can package the

appliance properly for return.