HOME TECH Digital HD Sat Receiver with HDMI connector and CI bay GB IE Digital HD Sat Receiver with HDMI connector and CI bay TARGA GmbH Lange Wende 41 D-59494 Soest www.silvercrest.
Digital HD Satellite Receiver SSR 1080 A1 Table of Contents Safety Instructions .................................................................................................................. 4 Operating Environment ....................................................................................................... 4 Notice on Mains Separation ................................................................................................ 5 Batteries ..................................................
Digital HD Satellite Receiver SSR 1080 A1 Sudoku .......................................................................................................................... 15 Media ................................................................................................................................ 15 OSD Menu - Expert Mode .................................................................................................... 16 Edit Channel ...........................................................
Digital HD Satellite Receiver SSR 1080 A1 Record Manager............................................................................................................ 38 HDD Information............................................................................................................ 39 HDD Format .................................................................................................................. 39 DVR Configuration ......................................................................
Digital HD Satellite Receiver SSR 1080 A1 Safety Instructions Before you use this device for the first time, please read the following notes in this manual and heed all warnings, even if you are familiar with handling electronic devices. Keep this manual safe for future reference. If you sell the device or pass it on, it is essential that you also hand over this manual. This icon denotes important information for safe operation of the product and for the user’s safety.
Digital HD Satellite Receiver SSR 1080 A1 Notice on Mains Separation The On/Standby button (18) does not fully disconnect the device from the mains. The device consumes electricity in the Standby mode. In order to completely disconnect the device from the mains, the power plug must be pulled out from the wall outlet. The device should be positioned in such a way that ensures direct and unobstructed access to the wall outlet so that the power plug can be immediately pulled out in an emergency situation.
Digital HD Satellite Receiver SSR 1080 A1 Repair and Maintenance Repairs are required when this device has been damaged in any way, for example, when the power plug, power cord or housing is damaged, when liquid or objects have entered the device, when the product has been exposed to rain or moisture, when the product does not work normally or if the product has been dropped. If you notice any smoke, unusual noise or strange smells, switch off the device immediately and pull the plug from the wall outlet.
Digital HD Satellite Receiver SSR 1080 A1 Conformity Notice This device complies with the basic and other relevant requirements of the EMC Directive 2004/108/EC, the Low-voltage Directive 2006/95/EC and the ErP Directive 2009/125/EC. The corresponding Declaration of Conformity can be found at the end of this User's Manual. Disposal of Old Devices Devices marked with this symbol are subject to the European Directive 2002/96/EC.
Digital HD Satellite Receiver SSR 1080 A1 Overview Controls and buttons 1 2 3 4 5 6 7 8 Power switch Power LED USB/REC LED Previous channel / menu navigation Next channel / menu navigation Infrared sensor 4-digit display CI slot (behind the cover) Connectors and sockets 9 10 11 12 13 14 15 16 17 IF OUT LNB IN USB HDMI TV SCART YPbPr L/R SPDIF ~230V 50Hz To connect another satellite receiver* LNB input of the satellite system USB port, max.
Digital HD Satellite Receiver SSR 1080 A1 Remote control 18 On/Standby 19 Numeric buttons 0 - 9: To switch to a specific channel and to enter numeric values or passwords, or to edit any channel names or favourite lists. 20 TV/Radio: Toggles between TV and radio mode. 21 SUB-T: Displays the subtitles (if available). 22 MENU: Opens the menu. 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 Navigation buttons in a menu: ,. To switch channels up or down: . Or to adjust the sound volume: .
Digital HD Satellite Receiver SSR 1080 A1 Getting Started Inserting the Batteries into the Remote Control WARNING! Do not use rechargeable batteries to power the remote control. The higher power supplied by rechargeable batteries may cause fire. Insert the supplied batteries into the remote control, as shown in the figure below. Take care to insert the batteries into the remote control observing the correct polarity (+ and – ). Open the battery compartment on the underside of the remote control.
Digital HD Satellite Receiver SSR 1080 A1 Connecting the Satellite Receiver You should only connect your satellite receiver to the mains once all other cable connections have been made. This will avoid any accidental damage to the satellite receiver or any external devices. A B C D E F G H I Connect the LNB of the satellite antenna to the LNB IN (10) of your satellite receiver.* Connect the TV set (or beamer) to the HDMI connector (12) of your satellite receiver (see page 12 – HDMI Connection).
Digital HD Satellite Receiver SSR 1080 A1 In order to open the advanced menu you may need a password. The factory-default password is: 0000. If no hard disk information is shown, you will need to format the hard disk with a compatible file system for your satellite receiver. To do this, press the Menu button (22) and then press the or navigation buttons (23) to select the "Expert Mode" item and finally select "Media". Select the "HDD Format" item.
Digital HD Satellite Receiver SSR 1080 A1 The following video signals are supported: HDMI: The HDMI output guarantees optimum video and audio quality. Note: This device has a standardised HDMI output. However, it is possible that picture or sound distortion may occur when connecting devices of first-generation HDMI input interfaces. In such cases you can select one of the following connection options: RGB: Very good picture and sound quality via a common (21-pin) SCART (Euro AV) cable.
Digital HD Satellite Receiver SSR 1080 A1 OSD Menu - Simple Mode Edit Channel To edit any existing TV and radio channels. The procedure will be the same for both TV and radio channels. Editing the Program Lists is possible in Expert Mode only. A description of how to edit the TV or Radio Channel List can be found on page 16. Favourite You can add your favourite channels to a separate list. Pressing the FAVOR button (31) gives you quick access to your favourite channels.
Digital HD Satellite Receiver SSR 1080 A1 Tools The Tools section contains lots of helpful information and functions to keep your satellite receiver up-to-date. Information Shows information about the software version of your satellite receiver. You will need this information when contacting Technical Support. USB A description of the USB menu can be found on page 33.
Digital HD Satellite Receiver SSR 1080 A1 OSD Menu - Expert Mode In order to open the advanced menu you may need a password. The factory-default password is: 0000. Edit Channel To edit any existing TV or radio channels. The procedure is the same for both TV and radio channels. TV Channel List You can add TV channels to favourite lists as well as move, lock, sort or edit them. Press the or (23) navigation buttons to select the satellite and the favourite list (e.g. Movie, Sport, etc.).
Digital HD Satellite Receiver SSR 1080 A1 Skip It is possible to have specific channels skipped when switching channels via the or navigation buttons (23). Press the green button (26) and mark the desired channel by pressing the OK button (34). Note: You can still watch a channel that has been marked for skipping by directly selecting it via the numeric buttons (19). Move Press the yellow button (36) and mark the desired channel by pressing the OK button (34).
Digital HD Satellite Receiver SSR 1080 A1 Delete Press the blue button (37) and mark the channels to be deleted by pressing the OK button (34). Press the OK button (34) again to undo the selection. When quitting, a safety prompt will ask you if you want to save the changes. Radio Channel List To manage the radio channels. The procedures do not differ from the items described under TV Channel List.
Digital HD Satellite Receiver SSR 1080 A1 Antenna Connection Motor Antenna or Fixed Antenna If you want to use the device with satellite systems capable of receiving more than one satellite, a DiSEqC LNB must be used instead of a universal LNB. If you have a motor-driven antenna, select the "Motor Antenna" option from the Antenna Connection menu. If you do not have a motor-driven antenna, select "Fixed Antenna". Satellite List The Satellite List contains all preset satellites.
Digital HD Satellite Receiver SSR 1080 A1 Antenna Setup (Fixed Antenna) To successfully launch a channel search, you need to adjust your satellite receiver to the installed antenna. The following settings apply to fixed satellite antennae. If you have chosen the "Motor Antenna" option from the "Installation | Antenna Setup | LNB1", please read the "Antenna Setup (Motor Antenna)" chapter. Satellite Please choose the satellite whose settings you want to edit.
Digital HD Satellite Receiver SSR 1080 A1 Polarity Satellites broadcast signals with vertical and horizontal polarity. It is recommended that you select the AUTO option, as this will enable receiving both polarities. However, under some special circumstances it may be necessary to choose either the horizontal (H) OR the vertical (V) polarity (for instance, if the different parties of a building share the same antenna system).
Digital HD Satellite Receiver SSR 1080 A1 Motor Setting Satellite Select the desired satellite to set up your motor-driven antenna. Note: If no satellites appear at this point, you can add them from the Satellite List menu. Transponder To find the satellite you can also choose a preset transponder. Note: You can omit the following steps if you are using a USALS motor. The satellite positions will be saved automatically. Position No.&Save Assign a position number for each satellite.
Digital HD Satellite Receiver SSR 1080 A1 reference point!" will appear. You can cancel this process by pressing the OK button (34). Single Satellite Search Satellite Choose a preset satellite from the list. If the desired satellite does not appear in the list, please add it as described in the "Satellite List" chapter. FTA Only Here you can choose whether to store unscrambled channels only or also scrambled channels. Select "Yes" to filter for unscrambled channels.
Digital HD Satellite Receiver SSR 1080 A1 Multi Satellite Search Satellite Overview of all satellites to be scanned during multi satellite search. For more information about the available settings, please read the previous chapter "Single Satellite Search". TP List To browse a single transponder. This search method is helpful if you only want to save a specific channel or a specific set of channels. You will find the corresponding parameters (broadcasting frequencies, etc.
Digital HD Satellite Receiver SSR 1080 A1 Delete TP To delete a highlighted transponder, press the yellow button (36). A safety prompt "Are you sure to delete?" appears. Select "Yes" to delete the transponder or select "No" to cancel. TP Search To browse a highlighted transponder, press the blue button. FTA Only Here you can choose whether to store unscrambled channels only or also scrambled channels. Select "Yes" to filter for unscrambled channels or select "No" to save all channels.
Digital HD Satellite Receiver SSR 1080 A1 Second Audio Select the audio language that you want to listen to for any programmes being broadcast with multiple audio languages (if available) whenever the first audio language is not available. If none of the two preferred languages is available, the programme's default audio language will be used. Subtitle Language Some programmes are broadcast with multilingual subtitles. Select the desired language.
Digital HD Satellite Receiver SSR 1080 A1 Display Setting Brightness Press the or navigation buttons (23) to adjust the picture brightness for the HDMI output. Contrast Press the or navigation buttons (23) to adjust the picture's overall brightness/darkness relationship (contrast) for the HDMI output. Saturation Press the or navigation buttons (23) to adjust the picture colour intensity for the HDMI output.
Digital HD Satellite Receiver SSR 1080 A1 Timer Mode The Timer Mode determines how often the timer will be activated: Once, Daily, Weekly or Monthly. Select "Off" to disable the timer completely. Timer Service Select "Channel" if you want to watch a specific programme. The satellite receiver will then switch to the selected channel at the set time. Select "Record" if you want to record the programme on the connected USB storage device.
Digital HD Satellite Receiver SSR 1080 A1 New Password To change the preset password 0000, enter a new password here. Confirm Password Confirm the new password. Please make sure you remember the password or keep it in a safe place. OSD Setting This menu allows you to adjust the appearance of the onscreen menu. Subtitle Display Select "On" if you want to show any subtitles (if available) for a programme. Select “Off” to disable the subtitles.
Digital HD Satellite Receiver SSR 1080 A1 Beeper The beeper is helpful when orientating the antenna to a satellite, The higher the sound, the stronger the signal intensity is. You can listen to the beeper by selecting "On" and opening the Antenna Setup menu. To disable the beeper, select “Off”. Auto Standby This function powers the device off automatically if it has been accidentally left on. If set to "On", the satellite receiver will power off automatically after approx.
Digital HD Satellite Receiver SSR 1080 A1 Common Interface To be able to watch scrambled channels you will need a special CI module for decoding. There are multiple coding algorithms on the market and you will need a specific smart card for the channel or channel set that you want to watch. Your TV service provider will inform you about the coding algorithms, decoding and prices.
Digital HD Satellite Receiver SSR 1080 A1 Save to USB Save Mode There are three different types of files that you can backup on a USB storage device. AllCode The entire satellite receiver software, for example to backup older versions before performing an update. You cannot edit this file, you can only restore it. It is recommended that you rename the default file "M3602AllCode.abs" with a date suffix after performing the backup. Radioback No function.
Digital HD Satellite Receiver SSR 1080 A1 USB After connecting a USB storage device, a screen containing a folder structure and the current data stored on the USB storage device appears. You can open this menu by pressing the USB button (38) on the remote control also. Please note that only MP3 and JPG file formats can be played back. The icons in this overview have the following meaning: Indicates that the root folder of the storage device is currently opened.
Digital HD Satellite Receiver SSR 1080 A1 Sorting You can press the FIND button (28) to sort the files contained on the connected USB storage device. The following sorting options are available: Default • Name(A-Z) • Name(Z-A) • Image 1st • Music 1st Playing Back Picture Files Use the navigation buttons (23) to select a picture from the overview and then press OK (34). An automatic slide show will start from the selected picture, This icon indicates that currently picture 8 of 13 is being displayed.
Digital HD Satellite Receiver SSR 1080 A1 Playing Back Audio Files Use the or navigation buttons (23) to select an audio file and then press OK (34). Playback depends on the currently selected repeat mode. The default mode is "Play all files of the current folder in sequence". If you want to change it, press the blue button (37) to select the desired mode.
Digital HD Satellite Receiver SSR 1080 A1 play the Audio List (music) or the Image List (pictures). Press the red button (27) to start playback, press the yellow button (36) to remove individual files from the list or press the blue button (37) to erase all files. Note: The files will be removed from the list and not deleted from the storage device. Tip: After you have created a music and an image list, start playing back the music list and then the image list.
Digital HD Satellite Receiver SSR 1080 A1 Game For your entertainment, there are 3 classic games to choose from.
Digital HD Satellite Receiver SSR 1080 A1 Media Record Manager The Record Manager can also be opened by pressing the PVR button (36) on the remote control. This menu allows you to edit any previously-made recordings. Lock You can lock your recordings to prevent any accidental deletion or because their content is not suitable for children. Use the or navigation buttons (23) to select the desired recording and then press the green button (26).
Digital HD Satellite Receiver SSR 1080 A1 HDD Information Shows information about the connected USB storage device. This example shows a 500GB hard disk connected to the satellite receiver. HDD Format If the satellite receiver is unable to detect your USB storage device, you must first convert it into a compatible format. Select the "HDD Format" command and press the OK button (34).
Digital HD Satellite Receiver SSR 1080 A1 USB Speed Detect Select "On" to perform a speed test of the connected USB storage device. This test will run in background while you use the USB storage device. If you have found the USB storage device to fulfil your needs on a daily basis, you can keep this option set to "Off" in order to hide any unnecessary messages and to increase performance. Record Type Select "TS" (Transport Stream) to keep the original format.
Digital HD Satellite Receiver SSR 1080 A1 Daily Use Powering the Device On/Off Power the satellite receiver on by pressing the power button (1) on the device and then by pressing the On/Standby button (18) on the remote control. Pressing the On/Standby button (18) again will power the device back off. In this case the device switches to standby mode. Selecting Channels Using the Channel Up/Down Buttons Press the navigation buttons or (23) on the remote control to skip to the previous or next channel.
Digital HD Satellite Receiver SSR 1080 A1 Operation EPG - Electronic Program Guide Your satellite receiver supports the Electronic Program Guide feature. Pressing the EPG button (24) will display programme information for individual or multiple channels. This gives you an overview of current programmes or any programmes for today and the coming days. Please note that EPG information is broadcast only from channels being broadcast on a transponder.
Digital HD Satellite Receiver SSR 1080 A1 EPG Timer To open the timer mode, in EPG overview press the green button (26). The parameters of the highlighted programme will be added automatically to the timer. A new window will appear where you can customise these settings: Timer Mode The Timer Mode determines how often the timer will be activated: Once, Daily, Weekly or Monthly. Select "Off" to disable the timer completely. Timer Service Select "Channel" if you want to watch a specific programme.
Digital HD Satellite Receiver SSR 1080 A1 Programme Information After powering on or switching to a different channel, an information window about the current programme will appear. Date/Time Channel name Programme title (current and next programme) Teletext available / not available EPG Subtitle HD icon for HDTV programmes Programme preset Satellite name and position Program List type (e.g.
Digital HD Satellite Receiver SSR 1080 A1 Using the Numeric Buttons If you know the programme preset where the desired channel has been stored in Program List you can recall this directly by entering it via the numeric buttons (19). After a few seconds, the satellite receiver will show the desired channel. TIP: You can press the LAST button (27) to toggle between the current and the last-viewed channel. Using the Program List You can show an overview of all stored channels by pressing the OK button (34).
Digital HD Satellite Receiver SSR 1080 A1 Appendix Troubleshooting No signal No signal is shown on the device nor on the OSD menu signal indicators. 1. First check the antenna cable: The braided lead of the external wire and the aluminium film must have good contact with the F connector and must not touch the inner (centre) wire! 2. Check the LNB settings. For ASTRA satellite you should use LNB1.
Digital HD Satellite Receiver SSR 1080 A1 Technical Specifications General Dimensions (W x D x H) Weight Operating temperature Operating humidity Input voltage Power consumption Programme presets Display USB Teletext Common Interface DiSEqC® Timers 266 x 170 x 40 mm 1090 g 5 °C to 35 °C 85 % rel. humidity 230VAC, 50Hz Standby < 1W if no timer enabled < 6W with timer enabled Power on/off max. 28 W 3000 4-digit 2.0 standard port 500 pages storage capacity CI 1.0 standard Compatibility: Version 1.0 max.
Digital HD Satellite Receiver SSR 1080 A1 Warranty Information English - 48
Digital HD Satellite Receiver SSR 1080 A1 English - 49
HOME TECH Digital HD Sat Receiver with HDMI connector and CI bay GB IE Digital HD Sat Receiver with HDMI connector and CI bay TARGA GmbH Lange Wende 41 D-59494 Soest www.silvercrest.
