Specifications

Satellite Receiver SSR 1080 B2
English - 28
The Common Interface menu lets you select the CI module detected
and adjust further settings for the CI/CI+ module.
Note: The settings, information and languages available depend on
the CI/CI+ module inserted. Please make sure you read the
Operating Instructions from the module manufacturer and of the
channel provider.
System
Information
Shows information about the software version of your satellite
receiver. You will need this information when contacting Technical
Support.
Default Setting
To open this menu, you have to enter the password. The factory-
default password is: 0000.
Delete Channels
This allows you to delete the channel lists. Select “All Channel” to
delete all channels or select “TV” to delete TV channels. Selecting
“Radio” will delete all radio channels. Press the OK/ENTER button
(25) to delete the selected channels. A safety prompt appears.
Select “Yes” on the safety prompt to delete the selected channels
definitely. Or select “No” to cancel.
Factory Reset
Here you can reset the configuration or load the factory-default
values. Select “Configuration” to reset all changed settings to the
factory-default values. Select “Default Setting” to delete all channel
lists and to reset any settings changed to the factory-default values.
Press the OK/ENTER button (25) to apply the option selected. A
safety prompt appears. Select “Yes” on the safety prompt to apply
the selected option definitely. Or select “No” to cancel.