Operation Manual

22
SUP 128 A1
GB
IE
Fault causes and rectifi cation
The following table will help with localising and remedying minor malfunctions:
Defect Possible cause Remedy
No indications on the
display
.
The device is not
switched on.
Switch the device on.
The plug is not
connected.
Insert the plug into the mains mains
power socket.
The mains socket is not
supplying any power.
Check the house fuses.
The turntable
does
not turn, in spite of the
fact that the pickup
arm
is located in
the playback position.
Wrong operating
mode selected.
Select the operating mode PHONO.
Pickup arm jumps,
slides or does not
move forward.
The device is not level. Stand the device on a level surface.
Anti-skating incorrectly
adjusted.
Check the anti-skating settings.
Tracking force set in-
correctly.
Check the tracking force settings.
Music played back
at wrong pitch.
Wrong speed selected
on the turntable.
Use the dial
to set the correct
speed (33 ⅓ or 45 rpm) and per-
form fi ne adjustment using the
PITCH ADJ.
controller.
NO USB is displayed.
No USB data medium
is connected.
Connect a USB data medium to
the port
.
Incorrect format.
Check that the data medium is for-
matted with the FAT32 fi le system.
NO CARD is displayed.
No memory card
connected.
Insert a memory card into the card
slot
.
Incorrect format.
Check that the data medium is for-
matted with the FAT32 fi le system.
NOTE
►
If you cannot solve the problem using any of the aforementioned methods,
please contact the Customer Service department.
IB_60308_SUP128A1_LB3.indb 22 08.04.14 09:32