Operation Manual

Universal Remote Control URC 801
English - 85
Erasing a Macro
 Press and hold the SET button (23) for at least
3 seconds. The display shows [CODE SETUP].
Then release the SET button (23).
 Press
(9) three times. The display shows
[MAKRO].
 Press the OK button (27). The display shows
[MAKRO1].
 Press
or [9] to select the macro you want
to delete.
 Press the OK button (27). The display shows
[SET UP].
 Press
(9). The display shows [DELETE].
 Press the OK button (27). The display shows
[SURE DELET].
 Press the OK button (27) to confirm the
deletion.
 The message [DELETED] will appear for a few
seconds and the device returns to the previous
level.
 Quit the process by pressing the EXIT button
(28) two times.