Operation Manual

Universal Remote Control URC 801
English - 87
The PC source commands are preset and cannot
be edited.
Microsoft Media Center is included in the
operating systems Microsoft Windows Vista Home
Premium and Microsoft Windows Vista Ultimate.
To quit PC mode, press any other source device
selection button (2).
Consistent Volume Control
The (VPT - Volume Punch Through) volume
control guarantees that the volume control is
always made for the TV set or Hifi equipment
regardless of the sound source that you have
selected. Therefore, you will not have to press the
TV or AUDIO source buttons before you set the
volume with the VOL+ (7), VOL- (8) or MUTE (5)
buttons.
Example:
The remote control is programmed for your TV set
and your DVD player. You play a DVD and the
remote control is set to the DVD (2) source. This
allows you to control the DVD playback using the
remote control. But you can control the TV set
volume without having to press the TV source
selection button first.
The PC mode does not support consistent volume
control.
Switching VPT between TV and AUDIO
VPT is set to TV as default. For any source that
you select, the volume control will always control
the TV set. But if you're using a home cinema and
you output the sound via Hifi equipment, you can
switch the volume control to the Hifi equipment.
Proceed as follows:
 Press the AUDIO source selection button (2).
 Press and hold the SET button (23) for at least
3 seconds. The display shows [CODE SETUP].
Then release the SET button (23).
 Press
(9). The display shows [BASIC VPT].
 Press the OK button (27). The message
[SUCCESS] will appear for a few seconds on
the display.
 Quit the process by pressing the EXIT button
(28).
VPT is now set to the device that is controlled via
the AUDIO source selection button.