Material Safety Data Sheet

NFPA ratings (scale 0-4 )
Health = 1
Fire =0
Reactivity = 0
Health = 1
Fire = 0
Reactivity=0
Other hazards
Results of PBT and vPvB assessment
PBT : Not applicable
vPvB: Not applicable
Chemical characterization : Mixtures
Description: Mixtures of the substances listed below with nonhazardous additions.
CAS No. Description % Range
CAS: 7440-31-5
Tin
96%
EINECS:231-141-8
CAS: 7440-22-4 Silver 3.5-4%
EINECS: 231-131-3
Additional information:
This solder product does not contain any Substance of very High Concern (SVHC) on the European Chemicals Agency
(ECHA) CANDIDATE LIST.
Description of first aid measures
After inhalation: Supply fresh air, consult doctor in case of complaints.
After skin contact: Immediately wash with water and soap and rinse thoroughly.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: Seek immediate medical advise.
Information for doctor:
Most important symptoms and effects, both acute and delayed.
Indication of any immediate medical attention and special treatment needed.
Extinguishing media
Suitable extinguishing agents: CO2, sand, extinguishing powder. Do not use water.
Special hazards arising from the substance or mixture
In case of fire, the following can be released:
Carbon monoxide (CO)
Carbon dioxide (CO2)
Advise for fire fighters
Protective equipment: Wear self-contained respiratory protective device.
Personal precautions, protective equipment and emergency procedures: Ensure adequate ventilation
Environmental precautions: Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and clearing up:
Dispose contaminated material as waste in accordance to item 13.
Ensure adequate ventilation.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
4. FIRST AID MEASURES
5. FIREFIGHTER MEASURES
3. COMPOSITION OF MIXTURE
6. ACCIDENTAL RELEASE MEASURES