Material Safety Data Sheet

Handling:
Precautions for safe handling: Prevent formation of dust
Information about protection against explosions and fires: No further data.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles: Store in a cool location.
Information about storage in one common storage facility: not required.
Further information about storage conditions: None.
Specific end use(s) No further relevant information available.
Additional information about design of technical systems: No further data.
Control parameters
Components with limit values that require monitoring at the workplace:
Tin 7440-31-5
PEL 2mg/m³
Metal
REL 2mg/m³
TLV 2mg/m³
Metal
Silver 7440-22-4
PEL 0.01 mg/m³
metal and soluble compounds ( as Ag)
REL 0.01 mg/m³
TLV 0.1 mg/m³
metal: dust and fume
Additional information:
PEL = Permissible Exposure Limit (OSHA)
TLV= Threshold Limit Value ( ACGIH)
OSHA = Occupational Safety and Health Administration.
ACGIH= American Conference of Governmental Industrial Hygienists
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
The usual precautionary measures for handling chemicals should be followed.
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Breathing equipment:
Exposure controls: use appropriate engineering control such as process enclousures, local exhaust ventilation to control
Airborne levels below recommended exposure limits.
When ventilation is not sufficient to remove airborne levels from the breathing zone, a NIOSH safety approved respirator or
Self-contained breathing apparatus should be worn. Consult with local procedures for selection, training, inspection and
maintenance of the personal protective equipment.
Protection of hands:
Protective gloves
Material of gloves:
Nitrile rubber, NBR
Natural rubber. NR
Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and to be observed.
Eye protection :
Face Shield or safety glasses
7. HANDLING AND STORAGE
8. EXPOSURE CONTROLS/ PERSONAL PROTECTION