User Manual

4
GB
Sound and vibration levels in the specification are determined according to
EN 60745. The figures given can be used to compare similar tools tested to
this standard. These figures may be used to assess exposure to noise and
vibration levels.
The figures represent normal use for the tool in normal working condition.
A poorly maintained, incorrectly assembled or mis-used tool may produce
increased levels of noise and vibration. The total working period that
you can operate this tool must factor in periods where the tool is idle or
switched off. Allow frequent rest breaks when operating this tool.
It is in the interest of users to maximise their safety using the correct safety
equipment like ear defenders that protect against loud or repetitive noise
and anti-vibration gloves that minimise vibration. Do not operate the tool
with your hands below a normal comfortable temperature as vibration will
have a greater effect.
www.osha.europa.eu provides information on sound and vibration levels in
the workplace that may be useful to domestic users who use tools for long
periods of time
Carefully read and understand this manual and any label attached to
the tool before use. Keep these instructions with the product for future
reference. Ensure all persons who use this product are fully acquainted
with this manual.
Even when used as prescribed it is not possible to eliminate all residual risk
factors. Use with caution. If you are at all unsure of the correct and safe
manner in which to use this tool, do not attempt to use it.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Work Area Safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents
b) Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control
Electrical Safety
a) Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce risk
of electric shock
b) Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded
c) Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the
risk of electric shock
e) When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock
f) If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Double insulated for additional protection
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with
your local authority or retailer for recycling advice.
Specification
Driver:
Voltage: ................................. 10.8V DC
No load speed: ...................... 0-2200min
-1
Max torque: ........................... 90Nm
Sound pressure: .................... 77dB(A)
Sound power: ........................ 88dB(A)
Uncertainty: ........................... 5.16m/s
2
Weighted vibration: ............... 1,5m/s
2
Weight................................... 1.0kg
Battery:
Voltage: ................................. 10.8V DC
Capacity: ............................... 1.3Ah
Type: ..................................... Li-ion
Charger:
Charging time: ..................... Max 5 hours
Output voltage: ...................... 12V DC
Supply type: .......................... 230-240V AC
Protection class: ....................
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
527958_Z1MANPRO1.indd 4 02/01/2014 17:25