User's Manual

41
SilverCare
12:00 PM
Fri Jan 1 2010
IMPORTANT
NOTE:
As you begin to review Section Three, Operating
Your SilverCare System, please keep in mind that
the system was designed for effective
communicating by one person at a time (similar to
a walkie-talkie).
In preparation for possible, eventual use of your
Priority Help or 911 calling function in an urgent
situation, we recommend you test your system
with and without different background noises, (like
the shower and the television) to ensure you know
how the system operates most effectively for you.
As always, it is important to speak clearly and
slowly. Then listen carefully to the Emergency
personnel’s instructions.
Base Console is set to “beep” each time you press a button.
To accept this, scroll past “KEY BEEP” to “SERIAL NUMBER”.
(If you prefer to turn Key Beep off, press OK, and press any
key on keypad to toggle to “OFF.” Then Press OK to return
to Main MENU.)
At SERIAL NUMBER, press OK button to see, and note the
Serial No. for your System on the back of this manual.
Press OK button one last time to Exit Set-Up mode and
return to Home Page.
Congratulations!
Initial Set-Up Section is complete!