User's Manual

system was designed to function as a two-way

communication tool, providing coverage in an average-

sized home, up to 100 feet in radius normal operating

circumstances. This range typically covers you inside your

home, garage, front and back yards. Since SilverCare is NOT

a cell phone, features like 911 will not work outside of the

operating range, but the ICE button and Reminders

continue to function while you are away from home.

Your system is quick and easy to set up, typically in 15

minutes using Base Console, or in less than 10 minutes

using the simple PC interface method, with the enclosed CD.

There is no need to register your new system. Simply set-

up according to the User Instruction Manual and the system

is ready to use.

GETTING STARTED

Follow these important guidelines before you use your

SilverCare system for the first time.

1. Read your User Manual carefully and thoroughly.

2. Do not plug your Base Console into AC Power until you

have connected the base antenna, battery pack and

phone line provided.

3. Check your system after you have completed Set-Up,

by calling one of your Priority Help numbers. Move

around your environment to determine the boundaries

of operation in your specific circumstance.

4. Check with local police or your Emergency Provider to

determine how to test your 911 call procedure.

5. The 911 and PRIORITY HELP buttons on your Watch

are NOT activated until INITIAL SET-UP is completed.