EC05 MANUAL PCI Express Card with 2 SATA 6Gbps internal ports
EC05 PCI Express Card with 2 SATA 6Gbps internal ports Introduction SilverStone created an excellent expansion card product, the EC05, which connects to the motherboard via single lane PCI Express 2.0 slot to support two internal SATA 6Gbps interface with maximum compatibility and stability. The EC05 can be configured to “HyperDuo mode” with one SSD and one HDD to support boost speed with SSD.
EC05 PCI Express Card with 2 SATA 6Gbps internal ports 1 SATA connector SATA connector INSTALLATION Install EC05 onto PCIe slot of Motherboard. (refer to PIC1) Installieren Sie die EC05 im PCIe-Steckplatz des Motherboards. (vgl. Abb. 1) PIC1 將EC05 安裝於主機板上的PCI-E插槽。 （請參考圖一） Installez le EC05 dans un emplacement PCIe de la carte mère. (voir image 1) 将EC05 安装于主机板上的PCI-E插槽。 （请参考图一） Instale el EC05 en el zócalo PCIe de la placa base.
EC05 PCI Express Card with 2 SATA 6Gbps internal ports INSTALLATION 2 Install the Marvell 9130 driver. Установите драйвер Marvell 9130. Installieren Sie den Marvell 9130-Treiber. 安裝Marvell 9130驅動程式 Installez le pilote de Marvell 9130. 安装Marvell 9130驱动程序 Instalar el controlador Marvell 9130. Marvell 9130ドライバをインストールします Installare il driver Marvell 9130. Marvell 9130 드라이브를 설치합니다.
EC05 PCI Express Card with 2 SATA 6Gbps internal ports INSTALLATION 3 After the driver is installed, “Marvell 91xx SATA 6G Controller” will appear under Device Manager(refer to PIC2) После установки драйвера в диспетчере устройств отобразится пункт "Marvell 91xx SATA 6G Controller" Nach Installation des Treibers wird im Geräte-Manager „Marvell 91xx SATA 6G Controller“ angezeigt.(vgl.Abb.
EC05 PCI Express Card with 2 SATA 6Gbps internal ports PLEASE SEE EXAMPLE BELOW PIC2 5
EC05 PCI Express Card with 2 SATA 6Gbps internal ports INSTALLATION 4 Connect your SATAIII hard drive onto the EC05 to complete the installation.
March, 2012
