Product overview ML02ʟML02MX Specification Material Acrylic front panel, 4.0mm aluminum frames, SECC body Color Black plus silver SST-ML02B-R (black,w/out LCD panel) Model SST-ML02B-MXR (black,with LCD panel) Motherboard Micro ATX, Mini-ITX, DTX External Slim optical slot x 1 internal 3.5” x 1 or 2.5” x 1 (vibration dampening) Drive Bay Cooling System Expansion Slot Top Oversized venting holes Sides 50mm fan slot x 3 Rear 50mm fan x 1 1 (includes 1 X PCI & 1X PCI-E riser cards) USB2.
ML02MX Multimedia Kit Remote control, CD Disassemble chart Venting holes Top cover 3.5" or (2.5") HDD 50 x 15mm fan slot (optional) Riser card brace 120W DC to DC board Power SW 50 x 15mm fan Power LED HDD LED LCD/IR (ML02MX) 50 x 15mm fan slot (optional) Silm type optical device Silm type optical device bracket Card reader 03 Door I/O (IEEE 1394 x 1, USB 2.
Motherboard & graphics/expansion card requirements Dimension for LC19's maximum allowable interface card (PCI-E or PCI) size in the expansion slot MICRO ATX MOTHERBOARD 244mm ( 9.6'') 98.4mm M L 171.8mm J H 2 1 F C Card reader/writer S R 3 4 244 mm ( 9.
This is a unique product,please read the following detailed installation guide we have prepared meticulously for you. ıIJ ENGLISH Loosen three screws from the rear of the chassis Bitte lösen Sie die 3 Schrauben an der Rückseite des DEUTSCH Gehäuses.
ıĵ Screw holes for securing slim optical drive brace ENGLISH Loosen four screws located on the bottom side of the chassis to remove the slim optical drive bracket DEUTSCH Lösen Sie die 4 Schrauben an der Unterseite des Gehäuses um den optischen Slim Käfig herausnehmen zu können.
ıķ B B A A A : 2.5" B : 3.5" A A B B ENGLISH Install hard drive (can use either 2.5" or 3.5" size) into the case and secure it with screws from the bottom of the chassis DEUTSCH Installieren Sie die Festplatte in das Gehäuse und befestigen Sie sie mit Schrauben von der Unterseite des Gehäuses(Sie können entweder 2,5" oder 3,5" Festplatten installieren). ESPAÑOL Instale el disco duro(se pueden utilizar las medidas 2.5” o 3.5”) en la caja y sujetelo atornillando desde la parte inferior de la caja.
ıĸ őńŊĮņŹűųŦŴŴ PCIE őńŊĮņŹűųŦŴŴġřIJķġŪůġŴŭŰŵġIJ PCI 3 PCIE PCI őńŊ 4 2 1 őńŊĮņŹűųŦŴŴġŦŹŵŦůŴŪŰůġŤŢųť ŇŪųŴŵġŴŭŰŵġġ őńŊĮņŹűųŦŴŴ őńŊĮņŹűųŦŴŴġ ŦŹŵŦůŴŪŰůġŤŢųť ŇŪųŴŵġŴŭŰŵ ŇŪųŴŵġŴŭŰŵ ʳ őńŊĮņŹűųŦŴŴġřIJķġŪůġŴŭŰŵġij 4 3 PCIE PCI ENGLISH PCI ŔŦŤŰůťġŴŭŰŵ PCIE 2 1 ŔŦŤŰůťġŴŭŰŵ Use of PCIE riser card can be inserted into the first or the second slot and turn the bracket 180 degrees, and then use 2 screws to secure it on the bracket. Then use 2 screws to secure the bracket on the chassis.
ıĹ ENGLISH Remove expansion slot cover and then re-install the center brace back onto the chassis Entnehmen Sie die Erweiterungskarten-Slotblende und DEUTSCH installieren Sie die Gehäuseschiene wieder in das Gehäuse. ESPAÑOL Quite la tapa del slot de expansión y re-instale la abrazadera sobre el chasis Retirez les équerres PCI et ensuite réinstallez la barre FRANÇAIS centrale dans le boîtier. ITALIANO Rimuovere la mascherina degli slot d’espansione e reinstallare il supporto centrale sul chassis.
IJIJ ENGLISH Install the slim optical drive onto the slim optical drive bracket and secure with screws DEUTSCH Installieren Sie das optische Slim Laufwerk auf den Slim- Laufwerkskäfig und befestigen Sie es mit Schrauben. IJij ESPAÑOL Instale la unidad óptica slim sobre el soporte de la únidad óptica slim y atornille FRANÇAIS Installez le lecteur optique slim dans son casier et vissez-le avec des vis. ITALIANO Installare l’unità ottica sottile nel suo supporto ed avvitare.
SilverStone ML02MX LCD/IR Insert the 4 pin USB connector from the LCD/IR module to your motherboard ENGLISH USB pin header. You can also use the included USB adapter to connect to an external USB port header on the motherboard. Verbinden Sie den 4 pin USB Anschluss mit den USB-Anschlüssen auf Ihrem DEUTSCH Motherboard. Bitte nutzen Sie zur Installation Ihre Motherboard-Anleitung.
SilverStone Milo ML02 add-ons and accessories NT07 NT07 ultra low profile CPU cooler Designed specifically for SilverStone's MoDT enclosures, the NT07 is a perfect solution for low noise CPU cooling in ML02 system (compatible with Socket 478/479 Intel mobile CPUs utilizing Socket 478 bracket).
Warranty Information D W T W 13