Owner`s manual

121
SHIFT/THROTTLE CONTROL
SYSTEM (MORSE CONTROLS)
(OPTIONAL)
You may have chosen as an option when
you purchased your 43MY, an electroni-
cally controlled Shift/Throttle Control
System, manufactured by Mathers, and
factory installed at the Silverton plant. The
purpose of this system is to provide the
operator with smooth, positive shift and
throttle operation requiring minimal
manual effort. With this system, only
one(1) shift/throttle control lever is re-
quired per engine; the left control lever
operates the Port engine and the right
control lever operates the Starboard
engine.
The Mathers Shift/Throttle Control
System is operated on DC electrical
power, controlled by a breaker switch
located on the AC/DC electrical Panel and
described as “Accessory”(Refer to the
Electrical Pages in this section of this
Owners Manual for the switch location).
Refer to the MATHERS Manual included
with your owner’s packet for additional
technical information concerning the
operation and maintenance of the
MATHERS SHIFT/THROTTLE CONTROL
SYSTEM.