Owner`s manual

The Shaft is connected to the engine

transmission with a coupling and extends

through the bottom of the hull. The Pro-

peller is attached to the end of the shaft.

The shaft is supported forward of the

propeller by two Struts. The struts support

and stabilize the shafts.

The rotation of the Propellers propel the

yacht in the selected direction, controlled

from the helm station.

The Rudders provide steering for the

GETTING FAMILIAR with your 43 Motor Yacht

This section of your Owner’s Manual will give you a virtual tour of your new 43MY.

The following areas will be described:

Hull, Deck, Interior, Bridge and Engine Compartment.

HULL

yacht to port or starboard, depending on

the direction they are turned by the opera-

tor from the helm station steering wheel.

The Zinc Anodes are dealer installed on

the trim tabs, shafts, rudders and transom

for the purpose of preventing electrolysis

and galvanic corrosion, which is discussed

in the Winterization and Storage pages in

the Cleaning and Maintenance section of

this manual.