Owner`s manual

45
generator are under constant attack from
salt water, gasses, vibration and normal
wear. Inspect every exhaust system com-
ponent often. Start with a visual inspec-
tion. Check each joint for discoloration,
carbon buildup, stains, water leaks or
other signs of damage. Inspect all metal
parts for corrosion, discoloration or flaking.
Check that all hose clamps are in good
condition and properly tightened. Carefully
inspect all exhaust and cooling hoses for
signs of wear, dry rot, cracking, discolora-
tion, chafing or swelling. If any of these
conditions exist, have the entire system
inspected and corrected by a qualified
technician before starting the engines or
generator.
Next, start each engine and generator one
at a time. Follow the full run of the exhaust
system, listening and looking for leaks.
While doing this, make sure there is ad-
equate ventilation and that your CO detec-
tor is on.
Other items to inspect are as follows:
Check that access panels around the
engine and exhaust are in place and fit
snugly to minimize the opportunity for CO
to enter the cabin. There should be no
large openings where CO could enter the
cabin. Ensure that all ventilation systems
are in good working order, and not blocked
or punctured. Check all sink drains to
assure that they have a good water trap to
prevent CO from coming in from the out-
side.
Finally, because poor running engines
produce excessive CO, make sure en-
gines and generator are tuned up. They
should run smoothly and not produce
black smoke. The spark plugs and ignition
systems should be maintained regularly,
and the fuel system and air filters should
be in good order.
CARBON MONOXIDE DETECTORS
If you carefully avoid potential CO accu-
mulation and maintain your systems
properly, you have made great strides
towards protecting yourself and others
from the dangers of carbon monoxide.
Another important line of defense is a CO
Detector, used whenever you’re aboard
your boat. A detector is the only way to
properly detect the presence of CO. There
is a CO detector located in every living
area on your Silverton Yacht. These CO
detectors are UL Approved for Marine
Use. If you replace the CO detectors at
any time, they must be replaced with
marine CO Detectors, not residential
detectors. Most CO detectors require
specific maintenance procedures to re-
main accurate and functional. Follow the
manufacturer’s instructions supplied to you
in your owner’s packet. Carbon Monoxide
Detectors should be installed in all boats
and the operation of them should be
known by all aboard.
Fuel Safety
Gasoline and Diesel Fuel are extremely
flammable. Proper handling is neces-
sary to provide for the safety of you
and your yacht.
✸ DO NOT smoke while fueling.
✸ Make sure that all accessories, both
engines, and generator are turned off
before beginning to fuel your yacht.