silvestri Bicam III silvestri Via Della Gora 13/5 - 50025 Montespertoli FI, Italy e.mail info@silvestricamera.com - www.silvestricamera.com Tel +39.0571.675049 Fax +39.0571.
In the diagrams you will see the position of the various components, others can be added or removed to construct a variety of systems. At first you may experience a little difficulty, but once used to the logic of the system, everything becomes simple and intuitive. Some tables will help you to combine the various elements on the basis of the lenses used.
Care instructions Technical information ! Do not force the vertical and horizontal shift movement when it gets to the end. dimensions height 175mm, lenght 185mm, depth 50mm (compact) ! Be careful of keeping all shifting elements clean. weight 0,80 Kg.
Digital Lenses in focusing mount & accessories S O code D7215 Schneider Digitar 24XL in Copal 0 and focusing mount on special board. code 2334K Schneider Digitar 35mm XL in focusing mount on special board. code 2223K Rodenstock Digaron 23HR in Prontor shutter and focusing mount on special board.
Remote Control Unit for Prontor and Schneider electronic The Digital Remote Control Unit 7053K interfaces digital backs, controls the Prontor magnetic shutters, simulates Hasselblad 555ELD. With the Silvestri panoramic base code 7072, produces panoramic shots from 0 to 360°.
Stitching shooting options Flexi bellow Maxi tilt control A combined bellow B tilt lock swing control table 3 swing lock D bayonet lock C bottom rail lock F How to attach, detach & operate the viewfinder In certain occasions this type of viewfinder simplifies working and helps in making the compostion process faster. side shift control G Slide the viewfinder bottom piece in the viewfinder housing (3) and rotate the black locking disk.
How to operate the sliding back adapter How to attach the Flexi Bellow Maxi Flexibellow Maxi is an essential accessory that transforms the Bicam from a camera for architecture into a camera for still life & industrial photography.
Bicam is now a compact view camera. Rise & fall movements, side shift, quick sliding of the back standard, fine focusing, tilt & swing movements. How to attach and detach the back adapters Line up the red dot on the camera's back ring with the one on the adapter. For the quick sliding of the back standard use the reference dots with click stop on the rail shown in the above picture.
Digital Lenses in Bayonet How to attach the back extension rings Bicam back ring Seen in the photo is the rapid 4-point mounting system with 8° rotation. Mounting a back attachment on the Bicam. After lining up the two red spots, insert the space ring then turn clockwise by 8°. All the other attachments are mounted using this same system.
Working apertures, image angles, image circles and movement ranges Schneider Macro Apo Digitar Lens Image scale Recom. working f-stop Image angle Image circle 24x36 mm diameter 37x37 mm 33x44 mm 37x49 mm 36x56 mm 40x54 mm Lens Recom. scale working f-stop 40 mm f/4 50 mm f/4 70 mm f/5.6 90 mm f/5.
Working apertures, image angles, image circles and movement ranges Schneider Macro Apo Digitar Lens Image scale Recom. working f-stop Image angle Image circle 24x36 mm diameter 37x37 mm 33x44 mm 37x49 mm 36x56 mm 40x54 mm Lens Recom. scale working f-stop 40 mm f/4 50 mm f/4 70 mm f/5.6 90 mm f/5.
Digital Lenses in Bayonet How to attach the back extension rings Bicam back ring Seen in the photo is the rapid 4-point mounting system with 8° rotation. Mounting a back attachment on the Bicam. After lining up the two red spots, insert the space ring then turn clockwise by 8°. All the other attachments are mounted using this same system.
Bicam is now a compact view camera. Rise & fall movements, side shift, quick sliding of the back standard, fine focusing, tilt & swing movements. How to attach and detach the back adapters Line up the red dot on the camera's back ring with the one on the adapter. For the quick sliding of the back standard use the reference dots with click stop on the rail shown in the above picture.
How to operate the sliding back adapter How to attach the Flexi Bellow Maxi Flexibellow Maxi is an essential accessory that transforms the Bicam from a camera for architecture into a camera for still life & industrial photography.
Stitching shooting options Flexi bellow Maxi tilt control A combined bellow B tilt lock swing control table 3 swing lock D bayonet lock C bottom rail lock F How to attach, detach & operate the viewfinder In certain occasions this type of viewfinder simplifies working and helps in making the compostion process faster. side shift control G Slide the viewfinder bottom piece in the viewfinder housing (3) and rotate the black locking disk.
Remote Control Unit for Prontor and Schneider electronic The Digital Remote Control Unit 7053K interfaces digital backs, controls the Prontor magnetic shutters, simulates Hasselblad 555ELD. With the Silvestri panoramic base code 7072, produces panoramic shots from 0 to 360°.
Digital Lenses in focusing mount & accessories S O code D7215 Schneider Digitar 24XL in Copal 0 and focusing mount on special board. code 2334K Schneider Digitar 35mm XL in focusing mount on special board. code 2223K Rodenstock Digaron 23HR in Prontor shutter and focusing mount on special board.
Care instructions Technical information ! Do not force the vertical and horizontal shift movement when it gets to the end. dimensions height 175mm, lenght 185mm, depth 50mm (compact) ! Be careful of keeping all shifting elements clean. weight 0,80 Kg.
In the diagrams you will see the position of the various components, others can be added or removed to construct a variety of systems. At first you may experience a little difficulty, but once used to the logic of the system, everything becomes simple and intuitive. Some tables will help you to combine the various elements on the basis of the lenses used.
silvestri Bicam III silvestri Via Della Gora 13/5 - 50025 Montespertoli FI, Italy e.mail info@silvestricamera.com - www.silvestricamera.com Tel +39.0571.675049 Fax +39.0571.