User's Manual

A) Align the red dot on the lens board

with the one on the camera body.

dimensions

weight

shift movements

lenses attachment

back attachment

reference code

height 175mm, lenght 185mm, depth 50mm (compact)

0,80 Kg.

15mm rise, 15mm fall - 15+15mm horizontal shift

Silvestri lens board, Silvestri bayonet

Silvestri standard four points attachment

3000

Technical information

C) Lock the lens board by rotating

the locking knob (5).

B) Insert the top of the lens board

first, then push it in the housing.

How to attach the lens board

Thank you for choosing the Bicam III camera. If you are a professional photographer

or if high quality photography is your passion, your choice could not be a better

one. You will understand reading these instructions the great opportunities this

camera, unique in its kind, can offer you. First of all the flexibility and the possibility

of having a ready to use compact camera that shows to be ideal for outdoor work.

Care instructions

! Do not force the vertical and horizontal shift movement when it gets to the end.

! Be careful of keeping all shifting elements clean.

! Regularly clean the Flexi Maxi rail with compressed air and paper, to remove

dust, sand etc.

! Do not force the shift and tilt movements, make sure you have completely

unlocked the locking knobs before using the tilt and swing controls.

! To remove the bellow of the Flexi Maxi from the camera body, do not pull the

bellow but push the bellow frame through the camera back's opening.

Camera adjustment

The precision of each movement of the camera is adjustable

by mean of microscrews,

see the following pictures showing where to find the microsrews for each movement:

Rise & fall movement:

Untighten the microscrews, push the side bar

(04) in and tighten the screws (02).