User's Manual

StreamCaster MIMO Radio User Manual 12/19/18
10017C000 Silvus Technologies Confidential Page
56
5. Web Interface
5.1 Getting Started
Connect a laptop to the StreamCaster radio using the supplied Ethernet cable and turn on the
radio. Users can type “ping <IPaddress>” in order to determine whether the radio is fully booted.
A web configuration will then be available by typing the radio IP address in a web browser. Please
ensure that your laptop is on the same subnet as the radio (172.20.xx.xx by default). Users will
be directed to the Basic Configuration page. (See Figure 23)
5.1.1 Basic Configuration
Figure 23 Basic Configuration Page
This page is used to set basic configurations. A brief description of each parameter is given below.
• Frequency: This defines the frequency of the signal. There is a drop-down menu for
frequency selection. The frequency choices will vary depending on the StreamCaster