User's Manual

StreamCaster MIMO Radio User Manual 12/19/18
10017C000 Silvus Technologies Confidential Page
96
• Routing Information – The user can view the routing path between any 2 nodes within a network
by simply specifying the source and destination node in the Control Panel on the left hand side.
The path will turn bold as shown in Figure 51 for the path from ‘node4411’ to ‘node4569’.
Figure 51 Routing Path
• Custom Node Naming – Naming each node in the network is as simple as double-clicking on the
node name and typing in a new name as shown in Figure 52. Once this is done, the user need to
hit enter to keep the node name. Otherwise it will change back to what it was. This feature enables
quick identification of nodes in the field and is especially useful in mission critical situations with
many mobile assets. The user can click on the ‘Save Labels in Flash’ button in the left pane to store
the node names to the radio’s flash memory. This will store the names on the radio even after the
radio is powered off. The saved labels can also be cleared back to the defaults by clicking ‘Clear
Labels in Flash’. The node labels set in one radio can also be broadcasted to other radios in the
network by clicking the ‘Broadcast Node Labels’ button.