Projector User and Installation Manual

17
BRIGHTNESS
CONTRAST
Video
S-Video
RGBS YCrCb RGB Grafico
HDMI™
RGBS 15kHz
YCrCb 15kHz
ADJUSTEMENTS
INPUTS
COLOR - -
-
- -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TINT
(NTSC)
SHARPNESS
SHARPNESS MODE
FILTER
Adjustable/can be set
Not adjustable/can not be set
CINEMA MODE
VIDEO TYPE
FLESH TONE CORRECTION
NOISE REDUCTION
-
-
-
-
-
-
-
TABLE 1 - INPUT SIGNALS AND ADJUSTABLE/SETTING ITEMS
CINEMA MODE
In AUTO the deinterlacer recognises if the video signal source
is a movie film (obtained from a Telecine device with 3:2 or 2:2
pull-down) and applies a deinterlace algorithm optimised for
this type of signal.
If the video signal source is not identified as a film, or if you
select NO the deinterlacer applies a Motion compensated al-
gorithm optimised for video camera signals.
VIDEO TYPE
Activates a filter to improve stability of pictures from video
recorders. To toggle between NORMAL, VCR1 mode and VCR2
mode press
on the remote control.
NOISE REDUCTION
This adjustments allows to choose the filter value for noise
reduction purposes.
As soon as this option is selected on the menu, the image is
divided in two parts.
In the left side the image is not altered by the filter, in the right
part the filter is activated.
This allows you to compare the effect of the filter.
It is possible to deactivated the filter (
NOT ACTIVE ), to use the
automatic adjustments (
AUTO ) or to manually select ( MANUAL )
the value suitable for the image with the VALUE adjustment.
In case of using the
VALUE adjustement, it is enoght to select
to cursor below and set the value with the
fl / ‡ keys of the
remote control.
Associated to the
NOISE REDUCTION there is the possibility to
use the specific function
(FLESH TONE CORRECTION) to make
skin tone more natural. Often the use of noise reduction filter
slightly degrades the image in those areas where skin tones are
visible. With the use of this function it is possible to maintain an
excellent image quality throughout the entire projected image.