Projector User and Installation Manual

26
You can purchase the following optional accessories at your
Dealer:
- Wall/Ceiling Bracket Kit.
12 OPTIONAL ACCESSORIES
Use only original, or SIM2 Multimedia approved, acces-
sories.
CAUTION: for ceiling/wall installation, by means of
suspension bracket, carefully follow the instruc-
tions and safety instructions recommended by the
Manufacturer in the bracket’s literature.
Video Image showing colour misalignment on vertical
details
- Verify compatibility of video/graphic signals with technical
specifications of your projector.
- Adjust Y/C Delay settings in the Image Adjustments /
Advanced Settings to reduce colour misalignment. For best
results use an external colour bar test pattern source.
Remote control does not work
- Check the batteries and for correct polarity.
- Ensure that the area between the infrared sensor (front of
projector) and the remote control is free of obstruction.
- Ensure that infrared sensors (front and rear of projector) are
not exposed to intense light levels.