User guide

3D HOME
16
17
Menu palette: Change Aspect Ratio
Menu palette: Adjust Time Stretch
5.1.1.2.1 3D Menù
This option allows to enable/disable the 3D vision. Here are the different modes:
• Automatic: it allows to enable/disable the automatic identification of the
possible 3D signal;
• 3D Manual: it allows the user to manually enable the 3D mode, on the basis
of the 3D format (the supported formats are Side By Side, Top Bottom, Tile
Format and Tile Format2);
• 2D Vision: it allows to display the 3D film in 2D mode, should the user not be
interested in 3D vision. In this case the 3D format source must be specified;
• Disabled: it allows to fully disable the 3D vision. This mode turns out to be
useful when the user likes better relying on the TV 3D functions.