User guide

28
3D HOME
29
The Diseq Port entry refers to the connection device for the possible different
satellite aerials (up till four). This option allows to setup one of the four, while leaving
out the others.
With the Automatic Scan the field Diseq Port has to be filled with a simple number,
referred to the port that receives the selected satellite (for example, 1 for Astra e 2
for Hotbird).
In order to choose the different values, work with the horizontal surfing arrows on
the remote control (ascending order on the right and descending order on the left).
When all the fields are filled with the right specifications, highlight the Start Scan
button and push the OK button on the remote control.
The Manual Scan is suggested to the skilled user. Once it is defined, the screen
displays further five fields, posing as many choices: Frequency, Polarity Mode,
Symbol Rate, Extend Search, Diseq Port.