User manual

CRYSTALCUBE—User Manual
2.
Turn upside down the
projector.
Loosen the four screws on
the bottom of the projector.
3.
Remove the glass cabinet.
4.
Remove the two screws
from the lamp module.
5.
Lift the module handle up.
6.
Pull firmly on the module
handle to remove the lamp
module and replace the
lamp module.
7.
Reverse steps 1 to 6 to
install the new lamp
module.
While installing, align the
lamp module with the
connector and ensure it is
level to avoid damage.
Note:
The lamp module must sit
securely in place and the
lamp connector must be
connected properly before
tightening the screws.
– 37
–