User guide

Info
Displays a summary of the projector settings
This function is displayed by pressing Info on the remote control.
Quick Menus
The quick menus provide access to the main adjustments that affect image quality
without opening the main menu. The adjustments Brightness, Contrast, Color, Tint,
Sharpness, Filter and Noise Reduction will appear on after the other in the lower part
of the screen by pressing ▴ or ▾.
Messages
The following messages may appear on your screen:
• No signal. The projector does not recognize any signal applied to the selected
input. In this case:
◦ make sure the selected input is connected to a video or graphic signal and
that this source is functioning correctly.
◦ check the condition of the cables used to connect the system to the
various sources.
◦ make sure the video or graphic signals supplied by the source are
compatible with the system technical specifications and, in particular, with
those of the selected input.
• Out of range. This message appears when either the resolution or the
vertical/horizontal frequency of the input signal exceeds system specifications
(for example a QXGA graphic signal).
4 Operation SUPERLUMIS
User Guide
36