ENGLISH DEUTSCH FRANÇAIS ITALIANO LT-30E45SU 50059494 ©2004 VICTOR COMPANY OF JAPAN, LIMITED 1004MKH-VT-VT WIDE LCD PANEL TV INSTRUCTIONS BREITBILD-LCD-TV TÉLÉVISEUR À GRAND ÉCRAN LCD TV A PIENO SCHERMO LCD MANUEL D'INSTRUCTIONS BEDIENUNGSANLEITUNG ISTRUZIONI
Contents How to remove the stand ........................ 2 Important Information ............................. 3 TV Control Buttons and Terminals ......... 4 Remote Control Buttons .......................... 6 Preparation .............................................. 7 Safety Precautions .................................. 7 Before Switching On Your TV ................. 9 Switching The TV ON/OFF ....................... 9 Operating The TV ................................... 10 Other Features ...............
WARNING Do not allow children to hang from the TV, place their elbows on the TV or lean against the TV. Doing so may cause the TV to fall over and lead to injuries. CAUTION: The TV screen may be damaged if the TV is carried as shown in the diagram below. The TV should always be carried by two people. How to remove the stand ENGLISH - 2 01-ENG-3008W-17MB11-1860UK-(LT-30E45SU)-50059494.p65 2 07.12.
Important Information Please take note EXCLUSION CLAUSE JVC shall under no circumstances be liable for loss and/or damage to the product caused by: fire; earthquake; accidental damage; intentional misuse of the product; use of the product in improper conditions; loss and/or damage caused to the product whilst in the possession of a third party; any damage or loss caused as a result of the owner s failure and/or neglect to follow the instructions set out in the owners manual; any loss or da
TV Control Buttons and Terminals FRONT VIEW REAR VIEW 67 $1 ' %< 7 9 $9 0(18 3 &+ 9 2 /8 0( 3RZHU FRUG 2Q 2II LQSXW VZLWFK ENGLISH - 4 01-ENG-3008W-17MB11-1860UK-(LT-30E45SU)-50059494.p65 4 07.12.
Headphone Audio Input (Left, Right) Video Input S-VHS Input Front AV STAND BY button TV/AV button MENU button Program Up, Program Down buttons Volume Up, Volume Down buttons / Power cord input 5 On/Off switch Antenna Audio Line Out L, R Scart 1 Scart 2 / 5 6 9+6 6 9+ 6 Audio In (for PC) PC Input TV Control Buttons 67$1' %< 67 $1' % < 79 $ 9 0(18 3 & + 79 $9 0(18 3 &+ 92/80( 9 2/80 ( 9 9 $&a +] 781(5 32:(5 ENGLISH - 5 01-ENG-3008W-17MB11-1860UK-(LT-30E45SU)-50059494.
Remote Control Buttons / I = (Stand By) button '9 ' TV / VCR / DVD Switch 79 Number buttons 5& 9 AV button (Tuner, Scart 1, Scart 1 RGB, Scart 2, Scart 2 RGB, PC, FAV, SVideo) BLUE / PICTURE Mode button YELLOW / Sleep Timer button MENU button = Cursor Up button OK button BACK button $9 3,&785( 0(18 Teletext / VCR / DVD Control buttons PIP Control Buttons 2. = Cursor Down button %$&.
Preparation For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in tropical and/or moderate climates. Features It is a remote controlled color television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system.
ings must not be blocked or covered in anyway. 6. Lightning In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet. 7. Replacement Part When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the original one. Unauthorised substitutions may result in fire, electrical shock, or other hazards. 8.
Before Switching On Your TV Power Connection IMPORTANT: The TV set is designed to operate on 220 - 240 V AC, 50 Hz. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Connections To The RF Input Socket Connect the aerial or cable TV plug to the RF input socket located at the back of the TV and connect the cable plug coming out from the TV out socket located at the devices (VCR, DVB etc.) to this socket as well.
Volume Setting Operating The TV You can operate your TV both using the remote control handset and onset buttons. Initial APS (Automatic Programming System) The following menu will be displayed on the screen when you turn on your TV for the first time. APS, searches and sorts all channels and stores them automatically on your TV, according to the transmission of programme systems in your area.
Programme Selecting (Previous or next programme) ton. One programme is displayed on the whole screen at this option. Press button to select the previous programme. pip Press button to select the next programme. Programme Selecting (direct access): Press digit buttons on the remote control handset to select programmes between 0 and 9. TV will switch to the selected program after a short delay.
sharpness brightness By pressing / button, select sharpness. right/left to change sharpness is seen By pressing / button, select brightness. right/left to adjust brightness is seen on the screen. Press button to increase on the screen. Press button to increase sharpness. Press button to decrease sharpness. Sharpness level can be adjusted between 0 and 8. brightness. Press button to decrease brightness. Brightness level can be adjusted between 0 and 100.
If pip option was selected, the window menu is seen as below. When PC Is Connected To TV ZLQGRZ LPDJH VL]H DXWR SLS VL]H SLS SRVLWLRQ image size GRZQ IRU VL]H VHWWLQJ By pressing / button, select image size. "right/left to change image size" is seen image size By pressing / button, select image size. "right/left to change image size" is seen on the screen. By pressing / button, you can change image size to full, regular and auto.
volume MENU button to exit the equalizer menu. By pressing / button, select volume. "right/left to adjust volume" is seen on the screen. Press button to increase volume level. Press button to decrease volume level. Volume level can be adjusted between 0 and 63. XVHU VRXQG PRGH +] +] N+] N+] N+] hp volume hyper sound By pressing / button, select hp volume.
vcr scart 2 out This item is displayed only when TV is in AV mode. By pressing / button, select vcr. "right/left to change vcr status" is seen By pressing / button, select scart 2 out. "right/left to select scart 2 out" is seen on the screen. You can set scart 2 out to Scart 1, on the screen. By pressing / button set vcr to on or off. tuner or FAV by pressing / button.
enter the menu. tv tuner menu has two submenu named as aps and programming. standard programming menu By pressing / button, select standard. right/left to change standard is seen By pressing / button in tv tuner menu select the first icon. Programming menu appears on the screen. on the screen. By pressing or button, you can change the standard to B/G, D/K, I or L/L'. By pressing / button, select channel type.
In program table, / buttons work like "Direction Up" and "Direction Down". By cursor action, programme selection is done automatically. FKDQQHO VHDUFKLQJ SOHDVH ZDLW RU SUHVV PHQX WR FDQFHO aps menu By pressing / button in tv tuner menu select the second icon. aps menu appears on the screen. At the bottom of the program table there is a programme sort functions section. Each function is activated by color button (seen above). By Delete you can delete programmes that you decided.
The first letter of the selected name is highlighted. To change that letter / button can be used, and to select the other letters, / button can be used. If the cursor is at the last letter of the Programme Name, pressing button moves the cursor at the beginning. On the contrary, if the cursor is at the beginning of the Programme Name, source select By pressing / button, select source select in settings menu. " to activate source selection menu" is seen on the screen.
rent time information, captured from Teletext will be displayed on the screen. Active window switch 67(5(2 By pressing button in any modes, PIP window appears on the screen. In PIP mode / buttons or are used to select active window. In Mono broadcast or in forced-mono (for stereo broadcast). button In Stereo broadcast. '8$/ $ If dual broadcast detected. Dual A is selected in default and also can be selected after Dual B by Remote Control. '8$/ % If Dual B selected by Remote Control.
ference between left and right channels. Hyper Sound selection will be displayed on the screen when the TV Status button is pressed or programme is changed. For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the FULL mode to restore the picture to its original shape. EXT Modes 16:9 ZOOM: By pressing the AV button or via source select menu, you can switch your TV to EXT modes (except being in Teletext).
Teletext Teletext is an information system that displays text on your TV screen. Using the Teletext information system you can view a page of information on a subject that is available in the list of contents (index). The menu is not available in text mode. Contrast, brightness or colour control is not available, but volume control is available in text mode. To Operate Teletext Select a TV station on which Teletext is being transmitted. Press button.
Teletext page number will be displayed on the upper left corner of the screen when the selected page is found. button to display the selected Press Teletext page. To Exit Teletext Press button. The screen will switch to TV mode. Fastext Your TV supports the 10 page Teletext system. When the page number of any of the 10 pages in memory is entered, the system will not search for the requested page; instead it will display the page automatically.
Camera And Camcorder to Connect to FAV Input Connect a decoder without an aerial socket to the TV Connect the decoder to the TV with a eurocable to Scart 1. TV And Video Recorder Connect the aerial cables. Better picture quality can be obtained if you also connect a eurocable to SCART sockets. Playback NTSC To use this option you can; Connect NTSC VCR player to Euroconnector at the rear side of the TV. Connect NTSC VCR player to RCA Jacks at the right side of the TV.
Antenna Connections Connect Peripheral Equipment HEADPHONE AUDIO $8',2 ,1 / 9,'(2 ,1 5 VIDEO ,1 ,1 $17 ,1 &$0&25'(5 FOR SATELLITE RECEIVER DECODER ENGLISH - 24 01-ENG-3008W-17MB11-1860UK-(LT-30E45SU)-50059494.p65 24 287 07.12.
PC Input Typical Display Modes The display has a maximum resolution of 1280 x 768, vertical sync. frequency range of 50-75 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes.
Remote Control Tips Care Of The Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer. Poor Picture Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers, non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial.
Specifications Item Model LT-30E45SU Broadcasting Systems PAL SECAM, B/G, D/K, I/I', L/L' Channels and VHF (VL) 46,25 MHz - 168,25 MHz Frequencies VHF (VH) 175,25 MHz - 463,25 MHz UHF 471,25 MHz - 863,25 MHz Cable TV (S1-S20/ S21-S41) Input Signal Video: Analog 0,7 Vp-p 75 ohm positive Sync: TTL Level positive or negative, Seperate sync. Horizontal Timing 30 - 69 KHz Vertical Timing 50 - 75 Khz Dot Rate 78,75 MHz max.
