Datasheet

ManualsBrandsSima ManualsLED stripsSL-20IR

Multi-light Array

Multiple SL-20IR units can be assembled

into a multi-light array by connecting them

together using our patent-pending

interlocking design. There is no limit to the

number of units that can be interlocked.

To connect two units, simply slide the shoe

of one SL-20IR into the mounting slot on the

side or top of the other unit as shown below.

Tighten the adjustable nut to secure the unit.

Note: lights do not provide power to one

another. Each light must be charged and

switched ON/OFF individually.

Video bracket

90 Day Limited Warranty

Sima Products warrants this product against

defects in materials and workmanship for a period

of 90 days from the date of retail purchase. During

the warranty period, the product will be repaired or

replaced, at Sima’s option. You can register your

product online at www.simacorp.com

Conditions

Ship your unit, freight pre-paid, including

reasonable proof of date and place of purchase

and description of problem to:

To use the video bracket (included):

1. Attach the video bracket to the bottom

of your camcorder by screwing the nut

into the threaded mounting hole. Do

not over-tighten.

2. Position the bracket where desired. Tip:

to avoid blocking the light with the

camcorder’s viewing screen, angle the

bracket forward to a position where

the light is across from the lens.

Infrared LED Night Vision

Video Light for Digital

Cameras & Camcorders

3. Attach the SL-20IR to the shoe mount

on the video bracket. Adjust as

needed.

Attn: Customer Service

c/o Sima Products

Bldg. #5

140 Pennsylvania Ave.

This package includes:

Oakmont, PA 15139

1- SL-20IR video light

This warranty is void if any defects are caused by abuse,

misuse, negligence or unauthorized repairs. All liability for

incidental or consequential damages is specifically

excluded. Some states do not allow the exclusion or

limitation of incidental or consequential damages, so the

above limitation or exclusion may not apply to you. This

warranty gives you specific legal right and you may also

have other rights which vary from state to state.

1 - AC adapter

Model SL-20IR

1 - video bracket

Light up the night

1 - user manual (this document)

Summary of content (3 pages)

PAGE 1
Multi-light Array Multiple SL-20IR units can be assembled into a multi-light array by connecting them together using our patent-pending interlocking design. There is no limit to the number of units that can be interlocked. To connect two units, simply slide the shoe of one SL-20IR into the mounting slot on the side or top of the other unit as shown below. Tighten the adjustable nut to secure the unit. Note: lights do not provide power to one another.
PAGE 2
Introduction To charge the batteries: The Sima LED Universal Video Light Model SL-20IR can be mounted on the universal accessory shoe of any camcorder or digital camera by sliding it into place and tightening the mounting screw. (If your camcorder does not have a shoe mount, the Sima Video Bracket included can provide a mounting platform. 1. Insert the jack on the power cord into the Batteries: The SL-20IR comes with a rechargeable, non-replaceable Lithium ion battery.
PAGE 3
Printing instructions: • Manual is to be printed two-sided in black ink on white paper. • Size before folding is 4.25” x 11”. • Finished size (after folding) is 2.75” x 4.25”. • Manual is folded so that front cover with Sima logo and picture of SL-10L is showing. • Manual is to be inserted inside package.