User`s manual

STP-120 Power Inverter
Page 16
Troubleshooting
Common power problems
Possible causes Recommendations
Battery voltage
below 9.5 – 10.5
volts
Recharge battery or check DC
power supply
Equipment being
operated draws too
much power
Reduce load to maximum of
120 watts
Inverter in thermal
shutdown condition
Allow the inverter to cool. Be
sure there is adequate
ventilation around the unit.
Make sure the load is no more
than 120 watts for continuous
operation
STP-120 Power Inverter
Page 5
• foreign objects into the AC
•
may result in a
ot a toy, keep away from children.
• T
5
115
• W and
• A
• NEVER immerse the unit in water or any other
liquid or use when wet.
DO NOT insert
outlet or the USB outlet.
DO NOT attempt to connect or set up the unit or
its components while operating your vehicle.
Divided attention while driving
serious accident.
• This is n
autiC ons
he STP-120 generates 115 Volts AC power
from your 12 volt car battery. Treat the 11
Volt AC output just like you treat the
Volt AC in your house. It is just as
dangerous. Keep away from children.
ith heavy use, the unit will become warm
possibly hot. Keep it away
from any heat
sensitive materials.
lways turn the inverter off by disconnecting it
from the DC accessory outlet when not in
use.