Specifications

YES
NO
Unit must be equipped with “Hydro Loc” braking system, so when the seat bar is
raised or operator is off the seat the unit will automatically put the brakes & loader
controls will not
operate for safety
Brakes shall be spring applied and hydraulically released.
TRAVEL SPEED
Minimum of 6.5 miles per hour in standard mode.
Minimum 11.2 miles per hour in 2nd speed
TIRES
Skid steer must have (4) 14.00 x 17.5 H.D. 14 Ply Titan HE
Severe-duty 47/32 tread depth
CONTROLS
High-flow switch shall be mounted on dashboard with a light when on
High-flow shall be a bi-directional switch
Loader must be operated by pilot controls
Pilot controls shall be hydraulic not electric
Steering: Forward, reverse, speed and steering controlled by one
independent hand control lever with hydraulic assist left side.
Lift Arm: Lift and tilt valves to be controlled by one independent hand control lever
on right side
Machine shall have a 14-pin connector installed to run planer
Auxiliary valve controlled a button on pilot control lever
Push button float control shall be operated by button on right hand.
Loader must have a foot throttle on the right side of platform and hand throttle.
Ride control shall be activated by push button and shall be included as
standard equipment
ELETRICAL SYSTEM
Batteries two (2) 650CCA 12-volt batteries as standard equipment with master
disconnect switch
130 Amp alternator
Starter minimum of a 4kw
(4) Work lights, front (2), rear (2) halogens
Auto reset circuit breakers and fuses
One roof mounted strobe light to be mounted, hard wired to a key switch to
always operate when machine is running, for safety
One reverse alarm shall be included
Horn shall be standard equipment
SAFETY EQUIPMENT
Operator canopy and side screens provided as standard equipment
Operator canopy to meet SAE standards J1040 and J/ISO 3449 for Rollover-
protective-Structure
and Falling-Object-Protective-Structure (R.O.P.S/F.O.P.S), and be of Level II
certification
Operator R.O.P.S/F.O.P.S cab must be capable of tilting rearward for
maintenance
Parking brake and work lights furnished as standard equipment
Horn and back-up alarm furnished as standard equipment.
2” Seat belt must be furnished as standard equipment.