Specifications

YES
NO
Planer must utilize a direct (HD) drive motor. (No planetary required)
Warranty 1 Year parts and labor
Vendor shall be authored dealer for unit being supplied.
Unit must be wired with a 14-pin connector.
Vendor must deliver and install planer onto Town owned machine.
Vendor shall also supply operator’s manual with unit.
OPTION 2 SNOW BLOWER OPTION:
84” High-flow snow-blower to fit Gehl V-400 Skid Steer Loader
Must be universal mount type
Unit must plug into 14-pin connector on machine
Minimum working width 84”
Minimum cutting height 36”
Minimum hydraulic requirements 30-42 G.P.M.
Minimum fan diameter 26”
Minimum auger size 18”
Hydraulically controlled truck loading chute
Chute shall be poly lined
Chute shall have a minimum of a 280° radius
Minimum weight of 1240lbs.
Minimum number of hydraulic motors (2)
VENDOR REQUIREMENTS
Vendor must be local authorized representative for the skid steer.
Vendor must be located within 30 miles of County for prompt service
response time
Vendor shall maintain a fully equipped road service vehicle capable of performing
road service to the unit in the event that it may become inoperable in the field
Two set of keys
OnOne set of parts and operators manuals shall be supplied at no charge upon
delivery of unit to the County
WARRANTY
Machine shall be covered by a (1) year or 1200 hour full machine warranty
Two years on engine or 2000 hours standard.
If the unit cannot be fixed in the field, it will be the vendor’s responsibility to
pick-up and return the unit after repairs have been made while under warranty