Specifications

YES
NO
Coolant temperature warning light
Hydraulic temperature warning light
Engine preheat indicator light
Engine power mode indicator (POWER MODE)
Engine mode indicator (ECO MODE)
Auxiliary hydraulic work mode indicator
Engine fault warning light
Engine oil pressure warning light
Air filter restriction warning light
Hydraulic filter restriction warning light
High speed travel indicator
Must come equipped with maintenance and diagnostic computer visual and
audible monitoring system to diagnose engine codes, auxiliary flow, DPF
Regeneration setting and adjustment, engine model and serial number
Bucket float indicator
Date Center: hour, meter, tach
Machine must be equipped with emergency engine shut down switch
GAUGES: (The following three gauges shall be standard)
Fuel
Coolant temperature
Hour meter gauges
HYDRAULICS: (Machine shall be equipped standard with high flow
hydraulics)
Unit must have an independent steel hydraulic reservoir mounted outboard for
easy access.
(Plastic hydraulic tanks will not be accepted)
Hydraulic tank shall be equipped with a sight gauge
Large rear hydraulic cooler shall swing out of the way for good engine access
Unit must come with three (3) auxiliary circuits
Standard auxiliary flow shall be a minimum of 23 G.P.M
Auxiliary high flow shall be a minimum of 40 G.P.M.
3
rd
Auxiliary flow shall be 17 G.P.M.
Loader must have a gear type pump.
Hydraulic oil shall be 10W30 engine oil
Auxiliary hydraulics must be two-way (dual-acting) with detent mode
Auxiliary hydraulics must have selectable low or high flow option from inside cab.
System pressure to be a minimum 3,044 PSI
Four double-acting cylinders must have a minimum 3,044 PSI rating.
Flat faced pressure releasing hydraulic couplers as standard equipment
Machine must be equipped with a total of 7 hydraulic couplers
(2) 3/4” Couplers for standard flow attachments
(4) 1¼” Couplers for high flow attachments
(1) ½” Coupler for a case drain back to tank
TRACKS
Tracks shall be adjusted using a grease gun and requires no special tools
The tracks shall have a bar style pattern